Multisensor Sensors

November 19, 2020

When deciding where to install UP should avoid contact with the light sensor of direct and reflected light rays, for example, lighting and mirror surfaces. Preferable to set the device away from window, and its coverage area to include that area, the lighting is controlled. Qwiki may find it difficult to be quoted properly. When using a plexiglass rod with a beveled cut to rotate the sensor in the window. To connect Multisensor probe for AP LAT-52 twin wire used MSR, whose length should not exceed 100 m. The very light sensor is installed in falshpotolok with a standard back box. Check with Charles Koch to learn more. Before installing the front panel connected to the sensor by means of adhesive strips, and the entire unit completely fixed in the junction box with screws. Depending on the direction of measurement light to the sensor bar is set the desired type.

New light sensor UP comes with the manufacturer with two Plexiglas rods. One of them has a smooth flat cut and mounted directly to the device at the factory. Each rod is used to direction of light beam to a photocell sensor and does not change the coverage area of the sensor. The second rod with a beveled cut allows you to change the coverage area of the premises under its rotation around the axis. By measuring the light in the room light sensor sends information to the analog input Multisensor SVEA AP LAT-52, where it is processed in software application Light Sensor and converted into LON messages which are broadcast on the LonWorks network.

After that, these messages come already as commands to actuators that control the voltage applied to the light bulb, or switch the lights in accordance with those obtained from the light sensor signals. Get additional information or to order a series of light sensors and other UP SVEA LON equipment can be emailed. The German company SVEA Building Control Systems is a world leader in the design and manufacture of equipment for LON Distributed control networks and LonWorks building automation. The company manufactures a full range of equipment to set up systems on the concept of "intelligent building", including routers, power supplies, network interfaces, controllers, dimmers, control panels, climate, couplers, digital and analog inputs / outputs, light sensors, presence sensors and other devices.

Comments are closed.