December 29, 2011

The second criterion is the curve screening and structure of the solution. They are of particular importance for a brick foundation, as to achieve the brick foundations of kinship often require a very fine-grained solution (Fig. 6). From 2 it follows that drawing should be applied thick layers of coarse-grained solution Bole. His property must also comply with the system. Method of processing plays an important role for the composition – if the tool is applied to layers of small thickness (converging to zero), this should be taken into account in its composition.

Only after taking into account all these parameters can be matched in color solution. As a rule, have to work with the various nuances of color to achieve a natural color game basis (Fig. 7). Surface protection / Conclusion Fig. 7: Playing with the color matched the color of brick masonry infill – the palace Illok / Croatia There are few topics in the field of protection of historical monuments that are so intense, contradictory and, alas, as a rule, the polar discussed, as is the case with the protection of the surface of the building material through a system of water repellency. This measure, which is usually synonymous with "water-repellent." This polar debate is in many cases, as the words of protection and denial, as a rule, expressed lightly and finish on a construction site in the form of war ver. Usually suffers from an object, whose needs often are ignored by anyone.

Here the main facts to consider: Usually there are types of bricks, which have extremely high sensitivity to the effects of frost on the basis of their specific structure (the distribution of pore radius). If the data materials are not protected against the penetration of large amounts of water, then after a while they start to disintegrate. Confirmation of this fact can be seen at many brick facades that require restoration.

Comments are closed.